|
TILLFOAM
PAT is a defoamer particularly suitable for paper coating. It finds also
application in paint and varnish industry as well as texile and tanning
industry, always for the defoaming or foam prevention of water borne
resin dispersions.
CHARACTERISTICS
Chemical composition:Dispersion of metallic soaps and eto-propoxilated
polymers in high boiling idrocarbons
Appearance:Yellow opaque liquid
Active content:ca 100%
pH (sol 1%):6 - 8
Ionic charge:Non ionic
Solubility:Dispersible in water
Viscosity:500 - 1000 mPa.s
FIELDS AND QUANTITY OF APPLICATION
TILLFOAM PAT is a polyvalent defoamer, particularly recommended for
synthetic resins dispersions based i.g. on styrene/butadiene, vinilic,
acrylic and other polymers.
Typical fields of application are:
Paper coatingAdhesives
PaintsTextile printing
Water borne printing inksTanning industry
The quantity of application may range from 0,1 to 0,3 % on the
formulation. It is advisable to divide the quantity, adding 2/3 before
of the pigment dispersion and 1/3 at the end of the mixing operation, in
order to prevent foam formation during the application.
DELIVERY FORM AND SAFETY
TILLFOAM PAT is delivered in 200 kg drums or 1000 kg containers
Although TILLFOAM PAT is not a dangerous product, we suggest to use the
normal caution measures usual in the handling of chemical products.
STORAGE
In normal storing conditions the product has a shelf life of at least 6
months. After a long storage, the product may undergo a certain
stratification. After stirring and reomogenising however, it takes its
previous efficiency back.
|
